Sustainable and economical forage storage

Mepu feed silos have the most reliable and optimal design and structure on the market. The hopper angle of inclination is 60°. Benefits of the new feed silos are solid construction, easy installation and almost non-existing maintenance. Feed silos have 5 years anti-Perforation Warranty and can be recycled when they are taken out of use.

The galvanic strength of the wall elements is up to 600g / m2. Bin wall and roof elements have exceptionally good corrosion resistance, which guarantees a long service life. Galvanization and waviness allow to reduce inner temperature avoiding condensation. Cylinder’s lower edge is bent, deviate drops of water through body sheet, protecting hopper and boots from humidity.

Hopper sheets are die-formed edge for tight fit with the outlet. Hopper sheet is fixed to cylinder at a flat part of the wave avoiding damaged. Leg’s design along with the cross bracings and anchor plate in one piece, facilitate loads transmission, increasing resistance and stability.

Bin roof is designed to withstand varying weather conditions. The roof is equipped with additional reinforcements on the eaves.

Options

Sturdy handrails, safety cages and non-slip steps guarantee a safe climb.

For comprehensive control of consumption.

Double doors ensure protection against water.

Available for sylinder and hopper.

Galvanized Ø100mm pipe for pneumatic loading.

Allows feed discharge by the side of the hopper.

With 4 legs

Model Volume [m³] Ø [m] Wall height [m] Height [m]
180/1T60 4,54 1,8 3,79 4,41
180/2T60 7,55 1,8 4,93 5,55
180/3T60 10,56 1,8 6,07 6,69
210/1T60 6,61 2,1 4,15 4,68
210/2T60 10,70 2,1 5,29 5,82
210/3T60 14,79 2,1 6,43 6,96
210/4T60 18,88 2,1 7,57 8,1
250/1T60 10,28 2,5 4,65 5,04
250/2T60 16,11 2,5 5,79 6,18
250/3T60 21,94 2,5 6,93 7,32
250/4T60 27,77 2,5 8,07 8,46
250/5T60 33,60 2,5 9,21 9,6

 

With 6 legs

Model Volume [m³] Ø [m] Wall height [m] Height [m]
275/1T60 12,42 2,75 4,89 5,21
275/2T60 19,19 2,75 6,03 6,35
275/3T60 25,96 2,75 7,17 7,49
275/4T60 32,73 2,75 8,31 8,63
275/5T60 39,5 2,75 9,45 9,77
320/1T60 18,27 3,2 5,43 5,6
320/2T60 27,44 3,2 6,57 6,74
320/3T60 36,61 3,2 7,71 7,88
320/4T60 45,78 3,2 8,85 9,02
320/5T60 54,95 3,2 9,99 10,16

 

With 8 legs

Model Volume [m³] Ø [m] Wall height [m] Height [m]
380/1T60 31,14 3,8 5,43 5,6
380/2T60 44,77 3,8 6,57 6,74
380/3T60 58,4 3,8 7,71 7,88
380/4T60 72,03 3,8 8,85 9,02

Gallery

Video